It's here...Becky's Nativity Kit!

Applying vinyl to your wall:

TIP: Make sure the wall is clean and dry before you apply your décor.

It’s best to firmly press and rub your design to make sure it sticks really well to the transfer paper when you pull it off the sticker paper backing.

Start from one end and slowly pull the transfer paper back. {tip: It is better to pull back and not straight up.}

Figure out where you want your design. Stick the corners to the wall if you need to step back and look at it. {tip: Laser levels are great friends. They basically show you exactly where you need to lay your design.}
Once you know where you want your design, firmly press the middle of the design against the wall and rub outward toward the edges.

To make sure your design sticks well to the wall and to minimize bubbles, gently rub a credit card or a food scrapper along your décor.

Starting at the top corner (doesn’t matter which one) slowly pull back transfer paper to reveal your FABULOUS design. {tip: It is easiest to start at the corner where the most intricate design is…in this case the words.}

Step back and enjoy!

Also available!

Smaller version to put on a plate or tile.

5X11-vinyl only $5.50

5X11 vinyl and plate $10.50

8X24 wall nativity $9.50

Find all of the details at my blog, here.